公司簡介
產品目錄
光纖毛細管/光纖V槽
光纖端蓋/定製透鏡
光纖陣列/尾纖
光纖角度加工/鍍膜
光纖連接器
光模塊
特種光纖
光學鏡片
代理產品
行業動態
聯繫我們

產品目錄 

 

光纖尾纖鍍膜

  • 光纖尾纖鍍膜
  • 光纖尾纖鍍膜
  • 光纖尾纖鍍膜
  • 光纖尾纖鍍膜
  • 光纖尾纖鍍膜
型號︰Customized
品牌︰3V-TECH
原產地︰-
單價︰CNY ¥ 1 / 件
最少訂量︰10 件

 共有 6 相關信息  
12345下一個

產品描述

Fiber Pigtail Coating

Protruding fiber pigtail is a kind of assembly which install a ceramic ferrule to the end of the coated bare fiber and keep the fiber’s endface some distance from the ferrule’s endface.Different from the traditional fiber and ferrule flat assembly way.Protruding fiber pigtail can eliminate film cracking caused by inconsistent thermal expansion coefficients of different substrates(fiber,epoxy,ferrule) under the coating layer and has obvious advantage in fiber coupled high power laser diode.

Product Application:

-Fiber laser pump diode coupling.
-High power laser processing flexible transmission.
-Medical laser equipment coupling transmission .
-High power laser test and measurement.
-Fiber optic Sensor(Connecting Photoelectric detector).

Product Features:

-The fiber tip is directly polished without any epoxy in the process,which can aviod laser absorption caused by epoxy residue and reduce the fiber burn rate efficiently.
-High quality fiber tip polishing surface,without scratches and particles on the fiber core.
-Coat only on the bare fiber tip(without ferrule&epoxy),which can eliminate film cracking caused by inconsistent thermal expansion coefficients of different substrates under the coating layer.
-Avoid the impact of the ferrule and epoxy on the laser chip at a close distance,effictively reducing COD and chip Contamination.
-Low heat absorption and high laser damage threshold of coating layer,Optical damage threshold(>200MW/cm2,test by quantel USA)

Fiber Type-01 MM-S135/155-22A,Core/Clad:135/155um,022NA;Customer Specified
Length of the fiber 200+/-10mm;Customize
Coating Parameter Anti Reflection Coating,R<0.5%@780-1000nm;Customize
Assembly Method Install SC  ceramic ferrule to the end of the coated bare fiber,

 

and keep the fiber tip protruding from the ferrule tip.

Protruding tip length 1+/-0.2mm;Customize
Fiber ferrule type Standard SC or LC ceramic ferrule; or Customized ferrule
Fiber Type-02 MM-S105/125-15A,Core/Clad:105/125um,015NA;Customer Specified
Length of the fiber 200+/-10mm;Customize
Coating Parameter Anti Reflection Coating,R<0.5%@780-1000nm;Customize
Assembly Method Install SC  ceramic ferrule to the end of the coated bare fiber,

 

and keep the fiber tip protruding from the ferrule tip.

Protruding tip length 1+/-0.2mm;Customize
Fiber ferrule type Standard SC or LC ceramic ferrule; or Customized ferrule
Fiber Type-03 MM-S105/125-22A,Core/Clad:105/125um,022NA;Customer Specified
Length of the fiber 200+/-10mm;Customize
Coating Parameter Anti Reflection Coating,R<0.5%@780-1000nm;Customize
Assembly Method Install SC  ceramic ferrule to the end of the coated bare fiber,

 

and keep the fiber tip protruding from the ferrule tip.

Protruding tip length 1+/-0.2mm;Customize
Fiber ferrule type Standard SC or LC ceramic ferrule; or Customized ferrule
Fiber Type-04 MM-S200/220-22A,Core/Clad:200/220um,022NA;Customer Specified
Length of the fiber 200+/-10mm;Customize
Coating Parameter Anti Reflection Coating,R<0.5%@780-1000nm;Customize
Assembly Method Install SC  ceramic ferrule to the end of the coated bare fiber,

 

and keep the fiber tip protruding from the ferrule tip.

Protruding tip length 1+/-0.2mm;Customize
Fiber ferrule type Standard SC or LC ceramic ferrule; or Customized ferrule

We support to process angle-polished fiber and fiber tip coating based on customer’s requested.

sz3v_tech@yeah.net

Whatsapp/Wechat:86-18913093537

付款方式︰TT
產品圖片






相關產品
D80能量光纖連接器鍍膜
D80能量光纖連接器鍍膜
CNY ¥ 1
SMA能量光纖連接器鍍膜
SMA能量光纖連接器鍍膜
CNY ¥ 1
裸光纖鍍膜
裸光纖鍍膜
CNY ¥ 1
光纖透鏡 透鏡光纖 光纖鍍膜
光纖透鏡 透鏡光纖 光纖鍍膜
CNY ¥ 100

公司簡介  |  產品目錄  |  行業動態  |  聯繫我們  |  網站地圖  |  手機版
  English     简体版     繁體版
Powered by DIYTrade.com